HANNA® instruments Catálogo General v38

pH solutions begin on page 2.158; see specific cleaning solutions on 2.172 Specifications HI981037 pH Range 0.00 to 12.00 pH Resolution 0.01 pH Accuracy (@25°C/77°F) ±0.05 pH Calibration automatic, one or two-point Additional Specifications Temperature Compensation automatic, 0 to 50°C (32 to 122°F) Battery Type / Life CR2032 Li-ion / approx. 800 hours of continuous use Auto-off 8 minutes, 60 minutes, or disabled Environment 0 to 50°C (32 to 122°F); RH 95% max Dimensions 51 x 124 x 21 mm (2 x 4.9 x 0.9“) Weight 46 g (1.6 oz.) Ordering Information HI981037 is supplied with pH 4.01 buffer solution sachet (2), pH 7.01 buffer solution sachet (2), cleaning and disinfection solution sachet for skin residuals, electrode cleaning solution sachet for skin grease and sebum, electrode storage solution (13 mL), CR2032 3V Li-ion battery, quality certificate, and instruction manual. Flat tip electrode Easy to clean electrode with a maintenance-free gel electrolyte Supplied complete Supplied complete with meter, probe, calibration solutions, and cleaning solutions. HI981037 Skin & Scalp pH Tester with specialized probe The HI981037 is a tester made specifically for measuring the pH of the skin and scalp. This tester uses a flat tip electrode with an open reference junction that allows for the direct contact surface measurement of pH. An open junction design is necessary in order to permit contact between the internal reference cell and the surface of the skin. The pH of the skin is slightly acidic at a pH of approximately 5. Having an acidic pH helps to protect against harmful bacteria and fungi while promoting the growth of beneficial bacteria. Disruption of the skin pH can lead to or amplify skin disorders. Many skin care products and soaps are made to be pH balanced so that the product does not alter the pH of skin outside a desirable range. Electrode features: • Flat tip pH Electrode · A flat tip electrode allows for the direct pH measurement of a surface. • Open reference junction · The pH electrode of this tester uses an open outer junction design. The open junction provides for a direct contact with the skin or scalp for the electrode to work with minimal moisture for a stable measurement. • Glass Body · The glass body of the pH electrode is not porous and can be cleaned and disinfected. Tester features: • Large LCD · Displays the measurement reading, stability indicator, low battery indicator, and calibration tags. • Automatic Calibration · This pH tester is calibrated automatically to one or two points. Buffers are recognized automatically and after calibration, buffer values used are shown on the display. • Automatic temperature compensation • Stability Indicator · An hourglass indicator is displayed on the LCD until a stable reading is obtained. • Automatic Shut-off · The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto-off feature can also be disabled. • Probe Diagnostic · During calibration the meter will display an error (Err) message as an indicator that the probe needs to be cleaned. • Long Battery Life · The skin & scalp pH tester has an exceptional battery life of approximately 800 hours. When the battery power is running low, the low battery indicator blinks. 1 Testers and Monitors 1.33 www.hannainst.com | testers

RkJQdWJsaXNoZXIy MTI3NTM=