HANNA® instruments Catálogo General v38

Specifications HI510 HI520 Digital Probes See the following pages Channels 1 2 Display Graphic LCD, 128 x 64 pixel B/W with backlight Digital Inputs 2 independent, galvanically isolated inputs (configurable for Hold & Cleaning functions) On state: 5 to 24 Vdc, low or high level active Analog Outputs 2 or 4 independent, galvanically isolated outputs 0 – 22 mA configurable as: 0 – 20 mA 4 – 20 mA 22 mA as alarm signal, configurable option Analog Output Accuracy ±0.2% f.s. Digital Communication • RS‑485 serial port for remote monitoring and control (Modbus) • USB-C port to retrieve log files and firmware upgrading Relays Up to 5 relays (independently configurable for process variables, Hold & Cleaning functions) Electromechanical relay SPDT and SPST contact outputs 5A – 250 Vac; 5A – 30 Vdc (resistive load) Fuse protected: 5A, 250V slow blow fuse Alarm Relay for All Measurement Alarms Electromechanical relay SPDT contact output 5A – 250 Vac; 5A – 30 Vdc (resistive load) Fuse protected: 5A, 250V slow blow fuse Data Logging • Interval log, up to 100 files, maximum 8600 records on each stored file. When the maximum limit is reached, the most recent file will automatically erase the oldest one. • Event log, maximum 100 records. When the maximum limit is reached, the last record overwrites the oldest one. Power Supply 100 – 240 Vac ±10%; 50/60 Hz; 15VA; fuse protected (2A, 250V slow blow fuse) Power Consumption 15VA Installation Category II Environment -20 to 50 ºC (-4 to 122 ºF); maximum 100% RH non-condensing Enclosure* Single case ½ DIN, IP65 ingress protection Weight Approximately 1.6 kg (3.5 lb.) Dimensions Width: 144.0 mm (5.7”); Height: 144.0 mm (5.7”); Depth: 151.3 mm (6.0”) Ordering Information HI510-0320 universal process controller with digital probe inputs, 3 relays, 2 analog outputs, RS-485 / Modbus serial communication protocol, 100-240 Vac is supplied with power cable, 3 m (9.84’) long; set of cable gland seals; instrument quality certificate; and quick reference guide with QR code for user manual download. HI510-0540 universal process controller with digital probe inputs, 5 relays, 4 analog outputs, RS-485 / Modbus serial communication protocol, 100-240 Vac is supplied with power cable, 3 m (9.84’) long; set of cable gland seals; instrument quality certificate; and quick reference guide with QR code for user manual download. HI520-0320 dual-channel universal process controller with digital probe inputs, 3 relays, 2 analog outputs, RS-485 / Modbus serial communication protocol, 100-240 Vac is supplied with 3m power cable, cable gland set, instrument certificate, and quick reference guide with instructions for manual download. HI520-0540 dual-channel universal process controller with digital probe inputs, 5 relays, 4 analog outputs, RS-485 / Modbus serial communication protocol, 100-240 Vac is supplied with 3m power cable, cable gland set, instrument certificate, and quick reference guide with instructions for manual download. Accessories HI510-01 panel-mount kit HI76510-10 patch cable, 10 m (32’9”) HI510-02 wall-mount kit HI76510-15 patch cable, 15 m (49’2”) HI510-03 pipe-mount kit HI76510-25 patch cable, 25 m (82’) HI76510-05 patch cable, 5 m (16’5”) HI76510-50 patch cable, 50 m (164’) Specifications * For a water tight seal, tighten the four front casing screws to 13.3 lbf•in (1.5 N•m, max. 2.0 N•m), of torque. HI510-0540 HI520-0540 HI510-0320 HI520-0320 Contact your local Hanna office for the latest information regarding additional compatible probes. See compatible probes on the following pages. 15 Process Instrumentation 15.58 | www.hannainst.com controllers

RkJQdWJsaXNoZXIy MTI3NTM=